Archives-June...  

The study examined the effect of Business Process Reengineering (BPR) resources on the performance of brewing firms in Nigeria. Following the Kassahun’s (2012) BPR perspectives, the study grouped BPR resources into financial, human and technological resources. A sample of 746 employees was randomly selected from a population of 3500 from five brewing firms quoted in the Nigerian stock exchange. The Likert-type instrument of five-point scale used for data collection has a Cronbach alpha coefficient of 0.85. The percentage frequency was used to examine the baseline information of BPR variables in brewing firms in Nigeria while OLS regression model analysed the effect of BPR on the performance of brewing firms in Nigeria. The study results showed that financial and technological resources were in adequate usage while human resources were moderate. Also, the performance of brewing firms in Nigeria at present is scored high in the five-point rating. The regression result indicated that BPR resources have 94% significant effect on the performance in brewing firms in Nigeria. Specifically, a positive influence was established such that financial resources (63%) has more influence, followed by human resources (20%) and then technological (19%). This implies that the use of resources is a veritable strategy to enhancing firm performance. Firms that follow the present wave of technological innovations will enhance their competiveness and survival rate. The study therefore concluded that BPR is a veritable tool to enhancing employee satisfaction, team work and cooperation, quality of service delivery as well as attainment of organizational strategic goals in brewing firms in Nigeria. The study however, recommended that firms in the brewing industry and other allied manufacturing firms should employ its resources in an adequately proportionate manner.

The leaves of Tectona grandis (Verbanaceae) was subjected to hydrodistillation in order to obtain the essential oil from the plant. The pale yellow essential oil gave a percentage yield of 0.184%. Relative percentages of individual component were analyzed by GC/GC-MS. A total of fifty-four (54) constituents were identified representing 86.5% of the total essential oil fraction. Oxygenated monoterpenes, sesquiterpene hydrocarbons, oxygenated sesquiterpenes, apocarotenoids, phenylpropanoids and non-terpene derivatives were the various classes of compounds identified. The LC50 value from the brine shrimp toxicity assay was 183.29µg/ml. The oil extract was also subjected to antibacterial assay and it showed significant activities against all the clinical test organisms used except Pseudomonas aeruginosa.

Chemical reaction effect on unsteady MHD flow through porous medium past an impulsively started inclined plate with variable temperature and mass diffusion in the presence of Hall current is studied here. The fluid taken is electrically conducting. The Governing equations involved in the present analysis are solved by the Laplace-transform technique. The velocity profile is discussed with the help of graphs drawn for different parameters like thermal and mass Grashof Number, Prandtl number, chemical parameter, Hall parameter, permeability parameter, magnetic field parameter and Schmidt number, and the numerical values of skin-friction and sherwood number have been tabulated.

East with ancient civilization and reconciliation culture always had been the centre of crisis and unrest. While the West especially The USA with a few antiquities has reached to an unbelievable development. It is possible to say that after the world war second, after a while it achieved a degree of development and stability. This achievement was a kind of temptation to the people of the East in order to travel and get some of these gifts. Immigration for having a better life was one of the concerns of eastern people and also is. Not only Eastern immigrant will face some economical and political problems, but also the crisis of Identity. According to Erick Erickson’s idea (1902 –1994 ) one of the biggest part of human’s identity is the social and cultural part, which prepare the opportunity to express and recognize two other optimal factors such as: biology and inner feeling. The cultural and social backgrounds are formed and grown in the family foundation and bigger one the society. If we take account the society foundation where the person grow as a main part so we can accept the social identity of a person as a national identity. For example: Iranian, Indian, Afghan and others. Eastern immigrants always faced the challenge of East and west culture and most of them had to accept the two identities which lead to Transnational-identity. Some of these immigrants with passing the level of adaptation with a new culture, suspended their national identity and adapted to the new identity while in others this process has not completed yet. It means their inner feelings do not accept this process. Keywords: Identity, Culture, and costum

Corrosion is one of the most damaging and costly naturally occurring events seen today. The most common kinds of corrosion result from electrochemical reactions. It can be prevented if the metal is coated with something which does not allow moisture and oxygen to react with it. It can be controlled by either alloying or by anti rust solutions. The naturally occurring plant products are eco-friendly, compatible, nonpolluting, less toxic, easily available, biodegradable and economic to be used as corrosion inhibitor.Euphorbia caducifolia has been selected to study its corrosion inhibition efficiency. It is easily available in any season. It is native to Thar Desert of India and located on rocky terrain, hills. It is used for treatment of bleeding wound, cutaneous eruption, urinary problems, kidney stones, rheumatic pain, bronchitis, jaundice, diabities, stomach pain, hernia etc. It is also called “Thor” and “Danda-thor”. It contains caudicifolin) norcycloartane type triterpene, cyclocaducinol, triterpenes euphol, tirucallol and cycloartenol. Corrosion inhibition efficiency of arial parts of Euphorbia caducifolia was studied for aluminium in HCl. Maximum inhibition efficiency was found 99.47% in 1N HCl acid with 0.8% leaf corrosion inhibitor whereas it was 94.21% for stem and 90.51% for flower with same concentration of inhibitor i.e. 0.8%. Inhibition efficiency was studied in different concentration of acid (1N, 1.5N, 2N and 2.5N) with different concentration of inhibitor (0.2%, 0.4%, 0.6% and 0.8%). Weight loss and thermometric methods were used. Inhibition efficiency was found to be increase with increase in concentration of inhibitor and decrease with increase in acid strength.

A set D of vertices in a graph G = (V, E) is called a dominating set of G, if every vertex in V-D is adjacent to some vertex in D. The domination number (G) of G is the minimum cardinality of a dominating set in G. A dominating set D of a graph G is a complementary tree dominating set, if the induced subgraph is a tree. The minimum cardinality of a complementary tree dominating set is called the complementary tree domination number of G and is denoted by ctd(G).The chromatic number of G is the minimum number of colours assigned to the vertices of G such that no two adjacent vertices have the same colour and is denoted by (G).In this paper we investigate cubic graphs for which ctd(G) = (G).

Friction stir welding is a relatively new solid-state joining technique which is widely adopted in different industry fields to join different metallic alloys that are hard to weld by conventional Fusion welding. FSW welding of material ( like aluminium stainless steel copper etc.) with good weld quality it is essential to manufacture specified fixture having accurate clamping capacity, heat resistance, compressive strength of base plate, flexibility in the welded plate dimension and easy to operate before and after FSW process. In this paper everything is calculated properly with complete design criteria to fulfill above mentions requirement

This paper presents sizing and control methodologies for a lead-acid flow battery-based energy storage system fed by Solar Photovoltaic system. The results show that the power flow control strategy does have a significant impact on proper sizing of the rated power and energy of the system. This paper focuses on the development of a control strategy for optimal use of the battery storage system through sliding mode controller. The effectiveness of this control strategy has validated through experimentation.

New transition metal [V(V), Co(II), Ni(II), Cu(II), Pd(II) and Cd(II)] complexes of (EPMPB) have been investigated in solution using Potentiometric and spectrophotometric methods. The composition of the complexes was determined to be 1:1 and/or 1:2 (M: L), the optimum conditions favouring the formation of the coloured complexes were studied extensively; protonation constants and their stability constants of the complexes were calculated. The stability constants of the formed complexes increase in the order Pd (II) > V (V) > Cu (II) > Co (II) > Ni (II) > Cd (II). Adherence to Beer's law was observed for the µgmL-1 concentration range form 0.31- 3.49 and 1.06 - 4.25(?gml-1) for Cu(II) ion and Pd(II) ions, respectively, Molar absorptive was 6,899 and 10,788 L mol-1 cm-1 for Cu(II) and Pd(II) ions, respectively.

Drip irrigation systems have a preference in selecting a suitable irrigation method in arid and semi-arid regions because of its high potential in uniform applying water in through a field. A proper management of drip irrigation system is, to some extent, dependent upon accurate understanding of wetting patterns distributions in soil under different combinations of soil type and emitter discharge rate. Using statistical distribution to estimate wetting front pattern in drip irrigation systems can improve their performance in different conditions. In this paper, the wetting area and water distribution on light, medium and heavy texture homogeneous soils in subsurface drip irrigation (SDI) and surface irrigation (DI) were evaluated. Experimental tests were carried out in a plexiglass lysimeter container with transparent walls. Emitters were buried at 15, 30 and 45 cm depths and discharge rates of 2.4, 4 and 6 L/h were applied. In this research, data of water front was divided into tree hourly periodic lengths of 2, 4 and 6. Then, with analysis of data in time series according to HYFA software output and goodness fit of Relative Residual Square Mean, suitable frequency distribution function for different conditions was evaluated. Based on relative frequency, the best fitted distribution for DI and SDI was found to be Normal and Pearson type III distribution (Moment method) and Normal distribution (maximum likelihood method).