Applied Chemistry

Honey is a natural product, it is used for different purposes as nutritional, medicinal and industrial and it is an important commodity in the local and international markets. This study has been carried out for honey analysis from four different regions in Sudan to determine the physiochemical characterization. The ash content in range 0.173 % to 1.013 % within Codex standard 0.6 %. Moisture content range was 13.936 % to 15.863 % the standard value 20%. The protein content range was 0.875 % to 1.750 %. Insoluble solids content ranged from 0.066 % to 0.337 %, with standard value 0.1%. Diastase activity content not detected in one samples and maximum value 10.241 Schade. The pH and acidity determined where pH ranged 3.81 to 4.77. Free acidity determined, results ranged from 16.00 to 33.50 meq/Kg, obtained within international standards 50 meq/Kg. Lactone content ranged from 118.50 to 297.00 meq/Kg. The total acidity was ranged from 134.5 to 314.5 meq/Kg. Analyzed honey samples are of high quality and conform to international standards. The variation of some compounds which detected in honey sample due to botanical origin of honey and other the parameters influence in honey quality.

Activated carbons were prepared by carbonization and activation of Coula eludies seed shells. This was done using ZnCl2 as the activating chemical and the activation was done using sample to activating chemical ratios of 1: 10 and 1:20 (g/v). The activated carbon obtained were characterized by determining the percentage yield, moisture content, ash content and percentage fixed carbon. The adsorption of methylene blue by the activated carbon was done using 100mg to 500mg of the activated carbon. The results revealed that the yield, moisture content, ash content and percentage fixed carbon of 1:10 impregnated activated carbon were 41.94%, 11.20%, 7.00% and 92.00% respectively while that of the 1:20 impregnated activated carbon were 38.76%, 18.56%, 5.50% and 96.50% respectively. These results show that the yield and the ash content of 1:10 impregnated activated carbon is higher than that of 1:20 impregnated activated carbon. While 1:20 impregnated activated carbon has higher moisture content and percentage fixed carbon. The adsorption study also revealed that 1:20 impregnated activated carbon had greater adsorption capacity. However adsorption efficient was increased with increase in adsorbent dosage.

The work aims to carry out a survey on the production and consumption of sausage in Benin. Indded, the sausage constitutes a source of protein and the surveys were carried out in the various communes of Benin, on the basis of a reasonable sample of 120 consumers and food sellers in each department of Benin. These surveys relate to the production of chicken sausage which is done according to the different stages which are the pre-treatment of raw materials, bonig, trimming, chopping, cutting, embossing, draining, druing and sterilization. These result showed that the majority of consumers surveyed use Minu and Morifresh brand sausages to accompany meals rich in protein. The results also showed that the different types of sausages are used to accompany several culinary dishes in Benin

The assessment of heavy metals (Hg, Cu, Pb and Cd) by means of a Peroxidase - based assay is here presented. The method is based the inhibition of peroxidase activity by heavy metals. Measurements were made spectrophotometrically via the catalytic oxidation of guaiacol in the presence of H2O2. Preliminary characterization and optimization of the assay system revealed enzyme activity of 130 U/ml, Vmax of 0.178mM/min and Km of 0.184mM. Optimal reaction time was found to be 7 minutes; optimal pH was 6 and temperature was 40°C. Inhibition-based estimation of heavy metal ions was evaluated via calibration curves of metal concentration against %inhibition of peroxidase activity. The assay revealed detection limits between 0.006 – 0.045mg/L for the metals and repeatability in the range of 2.3 – 5.4% RSD. Application of the method to water analysis revealed percentage recoveries between 76.0 – 124.0%. Overall, the method showed good potential for further use in the biomonitoring of heavy metal pollutants

Response Surface Methodology was used to evaluate the interactions of carbonization temperatures of adsorbents and concentrations of adsorbates on the adsorption capacities and removal efficiencies of activated carbons obtained from flamboyant (Delonix regia) pod bark (FB), milk bush (Thevetia peruviana) kernel shell (MB) and rice (Oryza sativa) husks (RH). The activated carbons produced at various temperatures (300 – 6000C) were used to adsorb concentrations (50 – 150 mg/L) of naphthalene and acenaphthene in a batch process at 150 rpm. The amount adsorbed was quantified with gas chromatography (GC-FID). Two factors interaction (2FI) model , showed that the interactions between increasing activation temperature of the adsorbents and increasing concentrations of the adsorbates increased the adsorption capacity of the MB while the adsorption capacities of FB and RH were reduced. The order of suitability of the adsorbents is MB > RH > FB and MB > FB > RH, respectively.

The seed of Syzygium aromaticum was analysed for its proximate and mineral elements constituents, the chemical characteristics and fatty acids profile of the seed oil were also investigated. Results revealed that the seed contain (g/100g) moisture (23.4 ± 1.25), ash (9.10 ± 0.55), crude fibre (10.65± 0.21), crude fat (18.90± 0.04), crude protein (7.00± 0.01) and carbohydrate (30.95 ± 2.17), gross calorific value of 321.9 K cal/g. The quantities of nutritive elements in mg/kg were Mg (1259.50 ± 30.10); Ca (782.40 ± 10.65); Fe (710.65 ± 5.20), Na (2.56 ± 0.02) and K (2.69 ± 0.03). The chemical properties of the seed oil revealed iodine value of 122.08 ± 1.01 mg/g oil, peroxide value of 6.00 ± 0.02Meq/kg and saponification value of 187.00 ± 1.42 mg KOH/g. Eleven fatty acids were identified in the seed oil by GC, total saturated fatty acids was 61.37 %, alpha linoleic acid was 19.09 % and docosahexaenoic acid was present at 2.94%. The seed could be explored as feed supplement and its oil considered for industrial applications.

A simple, reliable and selective square wave cathodic Adsorptive stripping (SWCAS) voltammetric method at modified carbon paste electrode (CPE) for determination of Cobalt(II) has been developed and evaluated. Square wave Cathodic Adsorptive Stripping Voltammetric (SWCASV) mechanism is proposed to interpret the amplified sensitivity. The procedure is based on the interfacial preconcentration of Cobalt (II) ion on magneson through a surface coordination effect. Different parameters such as medium, pH, accumulation potential, scan rate, accumulation time and ionic strength were tested to optimize the conditions for the determination of Cobalt(II) ion. The adsorbed form is reduced irreversible at optimal conditions viz; 0.15M Britton–Robinson universal buffer (pH~9.5). Linear concentration range 2×10-12 - 6×10-11 M (0.00012 – 0.00354 ng/mL (at 60s, can be determined successfully. The interferences of some common interfering species and some metal ions were studied. The application of the procedure in Lab tap water sample demonstrates that it is possible to determine Co(II) ion at a level as low as 5.13×10-10 mol/L (0.03 ng/mL) in real sample with a recovery of 103%, a standard deviation (triplicate measurements) of 3.08%, and a confidence level of 95%. The concentration of Co(II) in lab tap water sample was confirmed by analysis the sample by using Inductively Coupled Plasma Emission Spectrometer.

The aim of the current study was to determine the common physico-chemical parameters ( pH, Electrical Conductivity, Dissolved Oxygen content, Biological Oxygen Demand, Total dissolved solids, Hardness, Alkalinity, Acidity) of two different pond water systems - Nainaarkulam and Udaayarpatti kulam at Tirunelveli corporation were analyzed fortnightly from April to June 2019 and found that the water body that receives vegetable garbage, scrap, refuge and organic wastes from the main market of the town was more polluted than the other sites. Both water bodies varied according to the surrounding environments during the period of study. These results were used to inform the common people and decision-makers of the state environmental agencies.

The adsorption and inhibition of Aluminium corrosion in 1.0 M HCl using different concentrations of extracts of Baissea axillaris was investigated at 303 and 323K using weight loss technique. Weight loss and corrosion rate increased with increase in temperature both for the free acid and inhibited solutions, with marked reluctance to increase in both observable in for the presence of the extracts, varying with the extract concentration. Inhibition efficiency increased with increase in the concentration of the extract. The maximum inhibition efficiency of 86.3% was obtained for 10 µg/L extract but decreased to 68.4 % on increasing the temperature from 303 K to 323 K. The adsorption was best described by the Temkin and Langmuir adsorption isotherm from where negative Gibbs free energy change was obtained indicating spontaneous adsorption while negative heat of adsorption was obtained indicating exothermicity. Activation Energy was deduced from the Arrhenius equation while thermodynamic approach yielded the heat of adsorption.

The depletion of high grade reserves coupled with increasing market pressure for improved product quality has forced phosphate producers to re-examine their process flow-sheets and evaluate alternate or supplement processing routes. The world is rich in phosphate resources, but most of these resources are of middle and low grade ores, in the same time it is difficult to obtain high grade concentrate with high recovery using traditional separation methods. As a result of increasing complex mineralogy, steadily decreasing ore grades and ever increasing economic and environmental problems, the mineral processing industry over the past decade had to evolve appropriate means to beneficiate low grades phosphate ores deposits. Some of the important emerging trends and the evolutionary changes which have occurred in mineral processing technology are reviewed. New treating methods such as column flotation, nano-bubble flotation technique, application of amphoteric collectors, bio-processing, and application of surface modification using enzymes help to beneficiate low grade phosphate ores.