Archives- 

This paper will focus on construction defects analysis on different types of walling system for building. There are various types of construction building defects on the main structure of building. This study is conducted based on 3 buildings located at Universiti Sains Malaysia. The chosen buildings are Hamzah Sendut 3 Library, Aman Damai Hostel and Restu Hostel. Observation and monitoring the defects at the buildings are the methodologies used in this study. Information is recorded and supported by photographic and digital documentation. Furthermore, the interview with those expert and professional in this field will be another critical element of this study. Lastly, the analysis will be done according to the data collected through observation and monitoring, and interview. Based on the obtained information, there are three types of building defects took place which are crack, dampness and paint peeling. These defects are not dangerous as they do not affect the structure of the building and there is no symptom which shows that the building is going to collapse. This research provides the solution for the building defect of the existing building.

The trail was conducted from March 11- 17 May 2014 in the University of Gondar forage development garden. Water diluted Cattle Urine technology was examined for the current livestock rise vs feed shortage particularly in the dry season of the year. With the aim of improving the biomass yield of Maize (Zea mays L.). The used land was beforehand Elephant grass cultivated garden to reduce the residual effect of the soil. To address the aims 2m x10m trail was examined for 65 days; in all eight treatments each with three replications; the seed were local and traditionally used by farmers purchased and used to germinate. The seed were socked in water for 24 hours and germination was seen at six days of sowing. Treatments (T) were 10:1, 8:1, 6:1, 4:1, 2:1, and 1:1 (water: urine) ratio as well as Urea to DAP (Positive control) and the last with no urine, DAP & Urea fertilizer to (negative control).Treatments (Ts) 1, 2, 3, 4, 5, 6, 7and 8 each with three replications used respectively. Maize plant height in cm was 213.83; 199.39; 183.28; 181.38; 181.33; 166.28; 128.83 and 80.07 from 1 to 8 (Ts) respectively. Maize plant 2mx10m Biomass Yield in kg was 55; 38; 32; 31.33; 29.33; 22.67; 5.67; and 4.17 from 1 to 8 (Ts) respectively. The average over all treatments (Ts) maize plant estimated Biomass Yield in tons/ha was 82.5; 57; 48; 47;44; 34; 8.2; and 6.25 (Ts) respectively.. What has been observed from the trail was that; more diluted water to Urine ratio T1 (10:1) had much improved maize biomass yield; than the rest of treatments even from positive control trials. In the positive control trial drop-down biomass yield was pragmatic; this might be due to firing effect of the inorganic fertilizers; hence; jog-drop-watering was used that might not be sufficient enough to dilute like that of rainy water and causes to burn the roots. The harvested maize plant fodder was 100 percent palatable in feeding dairy cows. In conclusion ten parts of water with one part of cattle urine Technology can boost maize biomass yield. Urine collection method and storage technique to be further studied to exploit the cattle urine as nitrogen source is suggested.

During past decades, the management scholars have took various surveys to find a satisfactory structure for organizations. They supposed that, through studying the relation between features of a structure and operation, they can come to the best type of the structure and, consequently, guarantee the higher levels of organizational operations. Experimental studies illustrated that what is useful in an organization, may be useless for another. Such findings led to the emergence of 'contingency theory'. This theory claims that the amount or the degree of the relations changes between two variables, taking structure and operation for instance, and other consisting elements of an organization such as technology and workplace. The traditional organization used to possess hierarchical structures; while nowadays, coming across a more dynamic context, organizations experience novel types of organizational structure. Commonly, by elimination of hierarchy in decision making, organizations are able to response rapidly to the fast contextual variations. We believe that, in coming years, the organizational structures will move toward dynamic models to let the organizations get out of the bureaucratic state and pace in adhocratic structures.

The purpose of this paper is to present a numerical analysis of an unsteady three dimensional MHD flow of dusty fluid past an infinite inclined porous plate in presence of Soret effect, Dufour effect, radiation effect and Hall effect with variable temperature and concentration embedded in porous medium. At time t^'>0 the plate moves with constant velocity u_0 and at the same time, the plate temperature and concentration levels near the plate decreased exponentially with time t'. The governing boundary layer equations of flow problem are transformed into non linear partial differential equations using non dimensional quantities and solved numerically by Crank-Nicolson finite difference method. The obtained results for velocity profiles along x^' direction and z' direction, temperature profile and concentration profile are discussed through graphs and physical significance of quantities skin friction, Nusselt number, Sherwood number also discussed through tables. It is found that there are slightly change in velocity profile in x'-axis but measure change in z'-axis.

Immortality of the human soul has been, like other problems in philosophy, an unresolved and perennial problem. Over the years, solutions to this problem have proven inadequate as a result of the varieties of modes of philosophizing; philosophers? theories or views; as well as the logical tenacity of these theories. A materialist, who is logically consistent with the tenets of materialism, cannot accept the existence of any spiritual reality. Bertrand Russell denied the immortality of the soul on the basis that man, instead of being made up of substances that is body and soul, is composed of events .He believes that death brings the human event to an end. Since there is a difference between “being”, and “acting”, we can argue that the existence (being) of a soul that survives death could be logically defended. The human soul exists, though it is not explicitly graspable. It is, ontologically independent of the body. In fact the soul accounts for the boringness of the body. Though the soul and the body unite essentially in man, their union does not in any way deprive the soul of its uniqueness. Thus, at their separation, the soul retains its properties and nature viz: being, substantiality and spirituality. Thing being this way, this research is aimed at refuting the claim that the soul ceases to be when the body is gone. In other words , the human soul, being spiritual and subsistent, as well as the cause of life in the human person, is immortal. So, however convincing Russell?s argument against the doctrine of immortality of the soul may be, we must not lose sight of the truth that life is larger than logic. This study will employ the expository, hermeneutical and analytical method of philosophy.

The aim of this paper is to give decomposition of a weaker form of continuity, namely fuzzy -continuity, by providing the concepts of fuzzy -closed set, fuzzy - set, fuzzy -continuity and fuzzy -continuity.

The study analyzed the demand Analysis for household consumption of garri in Imo State. A multi-stage sampling technique was used to select 180 garri consumers from the state and the primary data were collected with structured questionnaire from the respondents. Descriptive and Inferential statistical tools such as means, standard deviation, percentage, multiple regression and logit regression analysis were used to achieve the specific objectives of the study. The result showed total expenditure on garri and fufu was N2,056.75 of which yellow garri has the highest share of N1,092.88 (53.14%), followed by white garri that was N588.88 (28.63%), and fufu’s share was N375 (18.23%), It further showed that garri is a normal, price inelastic good that has strong degree of competitiveness and suitability with fufu and income elastic. Age of the household head, household monthly income and price of garri are important factors influencing preference of yellow garri consumption. It was recommended that Price of garri should be stabilized across the markets to ensure consumers’ greater access and affordability, Households should be encourage to aggressively engage in cassava production and processing into preferred types of garri, fufu and other cassava products to stem ensure all year round availability of garri and other products in the country. 

In metal machining process turning operation of cylindrical parts are machined on CNC turning machine. Present work includes the machining of cylindrical component having non-concentric shape. Rotary fixture is designed for machining on CNC turning machine. To avoid unbalancing of fixture, fixture must be balanced by adding the counterweight on rotary fixture to minimize machining rejection. The fixture can be balanced by dynamic balancing machine. In project work rotary fixture will balance by Computer Aided Mass Balancing (CAMB) methodology. The methodology for balancing rotary fixture will use to calculate counterweight to be added on rotary fixture along with its position.

This paper addresses the development of a Human Powered Flywheel Motor (HPFM) operated forge cutter. This set-up is used to cut forage crop residues like maize Stover, sorghum Stover in dry condition. This cut Stover can be feed to cattle directly. The current practice by small livestock farmers is to cut forage manually by axe or machetes. The mechanized cutters also available which are hand operated as well as electric motor driven. But today there is severe power shortage in country like India, particularly in rural and remote area. It is convergent to the fact that the hand muscles are weaker than leg muscles. The concept of human powered flywheel motor is used to develop the pedal operated forge cutter. In this set-up flywheel is used as a motor or a store for energy. The operator pumps the energy into flywheel by pedaling bicycle- drive mechanism with a speed rising gear pair. After a one minute pedaling is stopped, and then flywheel shaft is connected to cutter shaft through spiral jaw clutch. The stored energy is enough to operate cutter effectively and efficiently. The test performance of developed cutter shows the remarkable improvements over hand operated forage cutter.

In Classical Hypothesis testing volumes of data is to be collected and then the conclusions are drawn, which may need more time. But, Sequential Analysis of Statistical science could be adopted in order to decide upon the reliability / unreliability of the developed software very quickly. The procedure adopted for this is, Sequential Probability Ratio Test (SPRT). It is designed for continuous monitoring. The likelihood based SPRT proposed by Wald is very general and it can be used for many different probability distributions. In the present paper we propose the performance of SPRT on 5 data sets of ungrouped using delayed S-shaped model and analyzed the results. The parameters are estimated using Maximum Likelihood Estimation method.